✨ New Arrivals Just Dropped!Explore
Rough Country 4" Suspension Lift Kit w/N3 Shocks for Ford Ranger 83-97 4wd
Rough Country 4 Inch Lift Kit | Ford Ranger 4WD (1983-1997)
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
$164.98
Original: $549.95
-70%Rough Country 4" Suspension Lift Kit w/N3 Shocks for Ford Ranger 83-97 4wd—
$549.95
$164.98More Images
Rough Country 4" Suspension Lift Kit w/N3 Shocks for Ford Ranger 83-97 4wd
Rough Country 4 Inch Lift Kit | Ford Ranger 4WD (1983-1997)
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rough Country 4 Inch Lift Kit | Ford Ranger 4WD (1983-1997)
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
Description:
Give your 83-97 Ford Ranger an aggressive look from front to rear with Rough Country's 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 31x10.5" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
Features:
Increased ground clearance
Levels the front with the rear of the vehicle
Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
Notes:
Does NOT fit models with manual steering.
Does NOT fit 87-88 models with "High Rider STX" package.
If vehicle is equipped with a front sway-bar, drop brackets are recommended. (#1018)
Install Time:
6-8 hours
Front Components:
Lifted coil springs Radius arm drop brackets I-beam drop brackets Power steering pitman arm Hardware
Rear Components:
3" lift blocks U-bolts Hardware
Fitment:
1983-1997 4WD Ford Ranger
Tire Info:
31x10.50R15 Factory 15 5x4.5 - -
